Setting up the OneSync Wi-Fi Smart Bridge to Control Landscape Lights

How Do I Install and Set Up the OneSync Wi-Fi Smart Bridge for My Landscape Lights?

The OneSync Wi-Fi Smart bridge is a game-changer for your landscape lights, as it can transform them into SMART landscape lights that you can easily control and customize with your smartphone. The below steps will guide you through the process of installing and setting up your OneSync Wi-Fi Smart bridge so that you can start enjoying the convenience and benefits of a smart landscape lighting system.

Watch this video or follow the steps below to set up your Wi-Fi Smart Bridge.

Installation

Step 1: Before installation, pick a spot for your Wi-Fi bridge that is near your Wi-Fi router and within 100 feet of your OneSync ecosystem.

Step 2: To install the Wi-Fi bridge, simply plug it into any standard outlet. You can also plug in the Wi-Fi bridge outside, but make sure that your outlet is outdoor rated with a cover.

Step 3: To pair the Wi-Fi bridge to your smartphone, press the pairing button three times until the indicator light begins to blink rapidly.

Step 4: Open your Feit Electric app and tap "go to add" or the plus sign in the top right-hand corner to add a device. Tap add, enter your Wi-Fi information, and tap next. Once your Wi-Fi bridge has been successfully added, tap next again. If you want to connect to a voice assistant, tap "use Alexa and Google assistant." Otherwise, tap done.

Step 5: To start adding OneSync lights to the Wi-Fi bridge, simply put the light or lights into pairing mode by holding down the button on the light until it starts blinking slowly.

Step 6: Then, in your Feit Electric app, select the group you want the lights paired to, and tap add fixture. Repeat this process to add to different groups.

Usage & Tips

• Attempting to pair your lights with the OneSync Landscape Wi-Fi Bridge, the remote, or other Landscape lights? Be sure to remove the protective film from the solar panel and charging the solar panel for at least 2 full days. Ensure that the solar panel faces the direction of the most sunlight. We advise carrying out the pairing procedure at night or turning the light fixture over so the solar panels are flat to the ground and out of direct sunlight.
• To remove a light, simply select the group the light is in, put the light in pairing mode, and tap remove fixture in your Feit app. Then, follow the previous steps to re-add the light to the desired group.
• Change the color of your lights by group or add effects. You can even set a schedule for your lights all from the Feit Electric app.

Note: The OneSync Landscape products, which are designed for outdoor use, are not compatible with our indoor OneSync Undercabinet Lights.