How Do I Set Up My Vista 15-in. Round Flush Mount LED Skylight?

Where can I find set up guide information for the Vista 15-in. Round Flush Mount LED Skylight?

Setting up the Vista 15-in. Round Flush Mount LED Skylight fixture is straightforward and can be completed in under 30 minutes with standard tools. This guide walks you through unboxing, mounting, wiring, and testing the product.

Key Areas Covered:

• Model Number: FM15/SKY/5CCT/WH
• Unboxing & What’s Included
• Powering the Device
• Common Setup Issues
• Set up Steps
• FAQs
• Usage & Tips

Unboxing & What’s Included:

Check your box for the following:

• 1 × LED Flush Mount Fixture
• 1 × Mounting Bracket
• Screws & Wire Nuts
• Installation Manual​

Powering the Device - The fixture requires a hardwired connection to a 120V ceiling outlet. Ensure power is off at the breaker before beginning.

Common Setup Issues:

• Incorrect wire connections (neutral/live swapped).
• Fixture not flush due to improper bracket alignment.
• Light not responding due to wall switch wiring issues.

Setup Steps:

1. Turn Off Power at the circuit breaker.
2. Remove existing fixture (if applicable).
3. Attach the mounting bracket to the ceiling junction box.
4. Connect the fixture wires:
5. Black (live) to black
6. White (neutral) to white
7. Green or bare (ground) to ground
8. Secure the fixture by aligning it with the bracket and tightening the screws.
9. Restore power and test modes using your wall switch:
   • 1st toggle: Skylight + White
   • 2nd toggle: White Only
   • 3rd toggle: Skylight Only​
10. Adjust color temperature using the internal switch before final mounting (if needed).

FAQs:

• Do I need a special wall switch?
  No, a standard wall switch will work.
• Can I use this in a sloped ceiling?
  It’s designed for flat ceiling installations only.
• What if I don’t see all lighting modes?
  Make sure to toggle the switch rapidly to cycle through the three lighting modes.

Usage & Tips:

• Use a voltage tester to confirm power is off before wiring.
• Check the toggle sequence if modes don’t respond as expected.
• Set your preferred color temperature before mounting for convenience.