How Do I Set Up My Vista 1 ft. x 4 ft. Flat Panel LED Skylight?

Where can I find set up guide information for the Vista 1 ft. x 4 ft. Flat Panel LED Skylight?

Ready to bring daylight indoors? This guide walks you through setting up your Feit Electric Vista Skylight, from unboxing to proper wiring and function testing. Make sure you have a compatible ceiling and a basic understanding of electrical connections or consult a licensed electrician.

Key Areas Covered:

• Model Number: FP1X4/SKY/5CCT/WH
• Unboxing & What’s Included
• Powering the Device
• Common Setup Issues
• Set up Steps
• FAQs
• Usage & Tips

Unboxing & What’s Included:

Make sure the following components are included in your package:

• 1x LED Skylight Panel
• Instruction Manual
• Mounting hardware
• Wire nuts

Powering the Device - Connect to a 120V power line. Ensure wiring follows color-coded standards (Black = Line, White = Neutral, Green = Ground). Product must be hardwired (not plug-in or battery operated).

Common Setup Issues:

• Incorrect or loose wiring
• Unsupported dimmer switches
• Failure to preset CCT prior to installation

Setup Steps:

1. Turn Off Power: Shut off electricity at the breaker box.
2. Unpack and Inspect: Verify all components are included and undamaged.
3. Select CCT (Color Temperature): Use the switch on the back of the panel to pick one of the 5 settings (3000K to 6500K). This must be done before mounting.
4. Install Mounting Bracket (if needed): Secure bracket to ceiling junction box.
5. Wire the Fixture: Match wire colors using included wire nuts. Ensure firm and secure connections.
6. Mount the Skylight: Attach to ceiling and secure per instructions.
7. Restore Power & Test: Turn the breaker back on and use your wall switch to test the modes.
   

FAQs:

• Can I change the color temperature later?
  No, it must be preset before the fixture is installed.
• Does this work with a dimmer?
  Yes, but only with compatible dimmers.
• Can I install it myself?
  Basic wiring skills are needed. Hire an electrician if unsure.

Usage & Tips:

• Test your CCT selection before completing installation.
• Use standard 120V wiring for safe operation.
• Label wires during setup if needed to avoid confusion.