How Do I Set Up My Vista 8-Inch LED Skylight?

Where can I find set up guide information for the Vista 8-Inch Canless LED Skylight?

Setting up the Vista 8-Inch Canless Skylight is fast and straightforward. This guide walks you through what’s included, powering the device, and solving potential setup snags. It’s designed for use in residential settings where hardwired ceiling lights are permitted.

Key Areas Covered:

• Model Number: FM8XT/SKY/5CCT/WH
• Unboxing & What’s Included
• Powering the Device
• Common Setup Issues
• Set up Steps
• FAQs
• Usage & Tips

Unboxing & What’s Included:

Make sure the following components are included in your package:

• (1) LED Skylight Fixture
• (1) External LED Driver
• Mounting Screws & Hardware
• Installation Instructions​

Powering the Device - This fixture is hardwired and includes an external LED driver that must be installed in the ceiling. It's powered through a standard 120V connection.

Common Setup Issues:

• Miswiring the driver to the main line can cause power failure.
• Improper wall switch use may disable MultiMode functionality.
• Failing to leave enough clearance for the driver may hinder proper installation.

Set up Steps:

1. Turn Off Power at the circuit breaker before beginning.
2. Unpack All Components and confirm all parts are included.
3. Cut Ceiling Opening (per sizing template, if included).
4. Connect the External Driver to power leads using wire nuts.
5. Secure Fixture to Ceiling using spring clips or provided mounting hardware.
6. Restore Power and use the wall switch to test MultiMode cycling.
7. Adjust CCT if needed by toggling settings.

FAQs:

• Can this be installed without a junction box?
  Yes, the external driver allows for canless installation.
• Can I install this fixture in sloped ceilings?
  It is best suited for flat ceilings due to its flush-mount design.

Usage & Tips:

• Ensure you install the driver where it can be accessed if service is needed later.
• Use a labeled wall switch to avoid confusion when toggling modes.
• Test color temperature before finalizing ceiling placement.