Why Isn’t My Vista 2 ft. x 2 ft. Flush Mount/Troffer Skylight Ceiling Light Not Working Properly?

Why Is My Vista 2 ft. x 2 ft. Flush Mount/Troffer Skylight Ceiling Light Not Working or Flickering?

Experiencing issues with your Vista 2 ft. x 2 ft. Flush Mount or Troffer Skylight Ceiling Light? Whether it’s flickering, dimming problems, or an unresponsive mode, this guide helps identify and resolve the most common concerns.

Key Areas Covered:

Model Number: TR2X2/SKY/5CCT/WH

• Power failures
• Mode switching issues
• LED performance inconsistencies
• Dimmer compatibility
• Wiring errors

Troubleshooting:

• Light Won’t Turn On:
  - Check breaker
  - Ensure wires are securely connected
  - Test with standard switch
• Modes Not Changing:
  - Flip wall switch quickly (off/on) to cycle between modes
  - Check that MultiMode feature is wired correctly
• Color Seems Off:
  - May be due to incorrect temperature selection during setup
  - Recheck installation guide for factory temperature settings
• Light Flickers When Dimmed:
  - Replace dimmer with a compatible LED-rated model
  - Flickering may occur if voltage drops or switch is faulty
  

FAQs:

• Can I install this on a dimmer?
  Yes, but ensure it’s LED-compatible.
• Why is only one light (skylight or white) working?
  Use your wall switch to toggle through MultiMode cycles.
• Can this fixture be used in high-moisture areas?
  Only if it’s ventilated and classified as “damp” (not wet) rated.

Usage & Tips:

• Keep the installation manual on hand in case future rewiring is needed.
• For trouble-free dimming, consult Feit’s dimmer compatibility list.
• If issues persist, contact Feit Electric's support or a licensed electrician.