How do I install the Feit Electric Type A/B linear tubes?
Upgrade your aging fluorescent lights effortlessly with Feit Electric's T8 and T12 LED linear tubes. Our Type AB tubes offer the utmost convenience and versatility, making them the ideal choice for replacing fluorescent lights.
Here's why our Type A/B tubes stand out:
- Versatile Replacement: Use them as a direct replacement for your fluorescent tubes, and when the ballast wears out, simply bypass it and continue using the same tube.
- Selectable White: Enjoy the flexibility of selectable white or cool white lighting options at 4000 Kelvin.
- Easy Installation: Installing our Type AB tubes is quick and straightforward since you don't need to replace the existing lamp holders, thanks to their double-ended wiring configuration.
Here's how to install your Type AB LED tube as a Type A light:
Step 1: Begin by turning off the power at the breaker for safety.
Step 2: Carefully remove your old fluorescent tubes by twisting and pulling them out.
Step 3: Insert your Type AB tubes into the lamp holders and twist until securely in place.
Step 4: Turn your lights back on and enjoy the improved illumination.
The best part about the Type AB LED linear tube is when your ballast burns out, all you have to do is bypass the ballast:
Step 1: Turn off the power at the breaker.
Step 2: Remove the Type AB tubes from the fixture by twisting and pulling them out.
Step 3: Take off the ballast cover to access the wiring.
Step 4: Cut all wires leading to and from the ballast.
Step 5: Strip about 1 inch of the feed wires and the wires from both lamp holders.
Step 6: Group one side of the lamp holder's wires and attach them to the black line or hot wire using a wire nut.
Tips:
- Always turn off the power at the breaker before handling electrical components.
- Ensure proper wire stripping and connection to prevent electrical hazards.
- If you're uncertain about any steps, consider seeking assistance from a professional electrician.
Comments
0 comments
Article is closed for comments.