Using the Feit Electric App on an Apple Watch

How do I use the Feit Electric app on my Apple Watch?

How to add a device(s) to control on your Apple Watch

1. Launch the Feit Electric App.
2. Tap on the option **Profile** in the bottom right-hand corner.
3. If your Apple Watch is paired to your iPhone, you should see the **Watch** option on the profile page.
4. Tap **Watch**.
5. On the **Watch** page, select **Device** to add devices to control on your Apple Watch.
6. You should be able to see three sections in **Device** page. Current Home with a red circle, No devices added with a green circle, and The Following Devices Does Not Support Apple Watch. 
7. To remove devices from your Apple Watch, tap on a device with a red circle. To add a device to your Apple Watch, tap on a device with a green circle.
8. When finished, tap on the word **Done** in the top right-hand corner of that page.

Displaying Devices and Scenarios in the Feit Electric App on an Apple Watch

1. When your iPhone is paired with your Apple Watch and the Feit Electric app is installed on the Watch, the devices and scenarios under your current home in the Feit Electric app installed on your iPhone will be displayed on your paired Apple Watch by default.
2. The Apple Watch only displays devices that support shortcut control, with an upper limit of 30.
3. The Apple Watch only displays manually executed scenarios, with an upper limit of 50.

Managing Devices and Scenarios in the Feit Electric App on an Apple Watch

To display specified devices and scenarios in the Feit Electric app installed on your iPhone on the paired Apple Watch and adjust their display order, perform the following steps:

1. Open the Feit Electric app on your iPhone.
2. Tap **Profile** > **Watch** > **Device**. Select devices or scenarios to display on the Apple Watch and adjust their display order.
3. Tap Done. A notification is sent to your Apple Watch to synchronize the data.

Controlling Devices and Executing Scenarios in the Feit Electric App on an Apple Watch

1. Open the Feit Electric app on your Apple Watch and slide the screen to switch between the device and scenario lists.
2. Select a device to control or a scenario to execute.
3. Tap and hold the screen to update the list data.

Handling a Device or Scenario Data Loading Failure in the Feit Electric App on an Apple Watch

1. Check that your iPhone and Apple Watch are properly connected through Bluetooth.
2. Check that you can log in to the Feit Electric app installed on your iPhone.
3. Open the Feit Electric app on your Apple Watch. Tap and hold the screen to update data.
4. If the data is not updated after multiple attempts, open the Feit Electric app on your Apple Watch, restart the Feit Electric app on your iPhone, and update the data again.
5. If the data is still not updated, restart your iPhone and Apple Watch. Connect your iPhone to your Apple Watch through Bluetooth and try again.